Linear Axis

EZ-4360 | Key Features

  • Slide 298 x 176 mm (l x w)
  • Stroke 300 mm
  • Payload up to 20 kg
  • Incremental Measuring System
  • Dynamic Linear Motor up to 2 m/s
  • High Repeatability
  • Granite Rail

Downloads

Product description

The EZ-4360 linear axis was originally designed for use in measuring machines and for moving optical components. The almost 300 mm long slide travels on the granite with bearings located far to the outside, allowing the transmission of high tilting moments. The solid granite rail and the ZeroMetTM (Renishaw) scale guarantee good repeatability even with moderate temperature fluctuations. The slide is designed for payloads of up to 20 kg. Its surface offers plenty of space for customer-specific structures and sensors. The axis is driven by a linear motor (Tecnotion UL6). Due to the magnetic preload, the axis can also be operated vertically. An incremental measuring system (Renishaw TonicTM) is installed in the standard version. Deviating strokes can be realized on request.

Applications:Electronics manufacturing, PCB manufacturing, inspection technology, non-contact 2D measurement, sensor and camera positioning for inspection, AOI (automatic optical inspection), automation processes.

In general: Applications with high demands on dynamics, precision, repeatability, smooth scan movements, short settling times.

Specifications

Type
Unit
EZ-4360
Stroke
mm
300
Positioning Accuracy (non-compensated) (XTX)
µm
3
Repeatability (bidirectional) 1)
nm
50
Position Stability 1)
nm
30-100
Vertical/Horizontal Straightness (XTZ/XTY)
µm
2
Pitch (XRY)
μrad
10
Yaw (XRZ)
μrad
10
Max. Speed unloaded
m/s
2
Max. Acceleration unloaded
m/s2
10
Mechanical Data
Unit
EZ-4360
Dimension L x W x H
mm
710 x 307 x 212
Max. Load 2)
kg
20
Load Capacity vertical (Z)
N
560
Load Capacity lateral (Y)
N
280
Moment of Tilt around X
Nm
25
Moment of Tilt around Y
Nm
20
Moment of Tilt around Z
Nm
70
Moving Mass (slide)
kg
7.5
Total Mass (incl. slide)
kg
77
Encoder
EZ-4360
Type
incremental, Renishaw Tonic
Signal
1 Vss, RS 422
Drive
Unit
EZ-4360
Type
3-phase, synchronous, ironless
Max. Voltage ph-ph
VAC
230 (300 VDC)
Constant Force
N
110
Peak Current
N
380
Constant Current
A rms
1.6
Peak Current
A rms
5.6
Cable Length (open end)
m
6
Interfaces and Environment
Unit
EZ-4360
Air Consumption
Sl/min
5
Supply Pressure
bar
5
MTBF
h
> 20,000
Limit Switch
included (5V)
Clean Room Suitability
applicable
Drive Control
EZ-4360
Standard
Kollmorgen Servostar AKD / S300 / S700
High End
ACS Controller; Triamec
1) depending on drive control
2) large mass moments of inertia must be taken into account
EZ-4360 Linear Axis

Control

We offer the linear axis EZ-4360 with the following drive controllers:

Cookie Consent with Real Cookie Banner